Alpha-InnoTec Luxtronik 2.0 - Program Area: Domestic Hot Water; Selecting the DHW Program Area; Setting DHW Mode of Operation

27
We reserve the right to make technical changes.
83052300eUK © ait-deutschland GmbH
Program area
“Domestichotwater”
select program area
In the navigation screen, select the symbol …
The screen changes to the menu “Domestic hot water
settings”…
1 Symbol for program area “Domestic hot
water” with menu title
2 Menu eld “Operating mode”
takes you to the menu “Domestic hot water mode of
operation”
3 Menu eld “Temperatures + –”
takes you to the menu “Domestic hot water tempera-
ture desired value / target temperature”
(If the domestic hot water is controlled via a thermo-
stat, this menu eld can be omitted.)
4 Menu eld “Time programs”
takes you to the menu “Domestic hot water time
programs”
5 Menu eld “High-speed charge”
takes you to the menu “Domestic hot water high-
speed charge”
6 Menu eld “Care programs”
takes you to the menu “Care progams”
settIng the mode of operatIon
“domestIc hot Water preparatIon”
In the menu “Domestic hot water settings”, select and
activate the menu eld “Mode of operation”…
The screen changes to the menu “Mode of operation”
The current mode of operation is highlighted with :
Follow the instructions provided in section “Setting
the domestic hot water mode of operation“ (under
program area “Information and Quick Setting“) in
the operating manual intended for end customers.
Return to the menu „Domestic hot water settings“.