58
We reserve the right to make technical changes.
83052300eUK © ait-deutschland GmbH
NOTICE
As long as the screed heating program is running,
the corresponding program symbol will appear in
the navigation screen:
manually termInatIng screed heatIng program
In the menu “Service“, select and activate the menu
eld “Screed heating”…
The screen changes to the menu “Service screed heat-
ing”: The menu line “SHP deactivate” assumes a dark
background…
Press “rotary pushbutton”. The screed heating program
switches off immediately, the display “SHP deac-
tivate” is automatically replaced by the display “SHP
deactivated”…
Scroll all the way down the screen, save the settings and
return to the „Service“ menu.
system confIguratIon
NOTICE
If there is a type of use which is not required for
your system, it is not necessary for the associated
program areas to be represented in the screen.
An example: Your system is only designed for heat-
ing mode. No components are installed for the do-
mestic hot water preparation. That means you do
not require access to the menus of the program
area “Domestic hot water”. It is therefore not nec-
essary for these menus to be shown in the screen.
In the “System conguration” you can specify that
these menus do not appear in the screen and there-
fore remain hidden.
NOTICE
However, hiding a menu does not affect the function
or operation of a type of use. If the type of use is
switched off, this must be set in the menu “Mode of
operation”.
In the menu “Service”, select and activate the menu
eld „Installat. conf.“…
The screen changes to the menu “Service Installat.
conf.”…
Deselect program area not required…
The example shown reveals that the menus of the pro-
gram area “Heating” are displayed in the screen. The
menus of the program area “Domestic hot water” are
not displayed.
Save settings or cancel. Return to the menu “Service”.
To Next Page
Loading...
Need help?
General
