48
We reserve the right to make technical changes.
83052300eUK © ait-deutschland GmbH
2.0
TDI Message Thermal disinfection signal
If set to NO, then the fault signal/message does not
arrive, otherwise see error message 759
release 2hg Release second heat generator
Time until the second heat generator is switched on
cancel or save settings. Return to the “Service Set-
tings” menu
aux. heat. hot water Hot water reheating
Deactivated in the factory (Display = No).
If activated (Display = Yes), the required hot water
value becomes the hot water target value (see page
29)
aux.serv.water max maximum time period for
hot water reheating
maximum time period, during which the hot water
should be reheated. If this time period is exceeded
the hot water reheating is cancelled.
Save settings or cancel. Return to menu “Service Set-
tings”.
To Next Page
Loading...
