All rights reserved. Reproduction of this document, even in part, is only permitted with the approval of alpitronic Srl.
1.2.2. Requirements for installation, commissioning and maintenance
The installation, commissioning and maintenance of the charging stations may only be
carried out by people who have received professional qualifications in accordance with the
regulations applicable at the location of the charging station and who are familiar with the
local statutory safety standards. Furthermore, these individuals must have successfully
completed the training courses prescribed by alpitronic. More information about the
mandatory training courses is available on the website https://training.hypercharger.it/.
In addition, before carrying out any work, these original operating instructions must be
carefully read by the responsible people and strictly observed.
If you have any questions, the hypercharger support team can be reached using the contact
details given above.
1.3. Safety instructions for installation and maintenance
These warnings and instructions apply to all activities related to the installation, servicing
and maintenance of the HYC50.
Warning
Electrostatic discharge
The HYC50 contains components and circuit boards that are sensitive to
electrostatic discharge. Sufficient ESD measures to protect the electronic
components should be taken during assembly and maintenance (e.g.
wearing a grounding wristband).
To Next Page