Alpitronic hypercharger HYC50 - Technical Data

HYC50 - Operation and Installation Guide
Version 2-2
11 Technical data
Page 97 of 102
All rights reserved. Reproduction of this document, even in part, is only permitted with the approval of alpitronic Srl.
11. Technical data
General technical data:
Parameter
Nominal value
Degree of protection
IP54
Place of assembly
Indoors and outdoors
Humidity transport or storage area
0 - 95% rel. (non-condensing)
Operating humidity range
0 - 95% rel.
Degree of pollution
4
Storage temperature range
-40ºC to +55 ºC
Operating temperature range
-30 °C to +55 °C (+40 to +55 °C with
derating)
Mechanical shock resistance (IEC62262)
IK10
Type of fastening
Wall mount or pedestal
Accessibility
Without restrictions
Installation height
Up to a maximum of 4,000 m above sea level.
If CHAdeMO cables are present, the max.
installation height is limited to 2,000 m a.s.l.
Protection class
Class I (Protective earthing)
Supported charging mode
Type 4
Max. air flow HYC50
400 m
3
/h
Table 12: Technical data (general)
Notice
The full performance potential is not guaranteed at every temperature and
altitude.
Type
Width (mm]
Height [mm]
Depth [mm]
Weight [kg]
HYC50
520
1300
220
117-165 kg
Table 13: Mechanical data