HYC50 - Operation and Installation Guide
Version 2-2
3 Packaging, transportation, storage and handling
All rights reserved. Reproduction of this document, even in part, is only permitted with the approval of alpitronic Srl.
Notice
Cardboard and plastic are used as packaging materials. The package is
delivered on a wooden pallet.
The HYC50, including packaging, can weigh up to 200 kg depending on
the configuration.
During transport and storage, a maximum of 4 devices (pallet with
packaging) may be stacked on top of each other.
The hypercharger must be stored in its original packaging in a dry
environment between -40 °C and +55 °C.
Take special care when unpacking with knives. HYC50 or other
components could be damaged.
To Next Page
Loading...