124 Series 90B ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
Event Descriptor
The Event Log format consists of a Date and Time of the event, a Descriptor that identifies the type
of event, the Station ID and Device ID identifying where the Alarm came from, Point Number for the
alarm and Event Description which is configured for every input. Any of these fields can be sorted by
selecting the field description. Selecting it again will do a reverse sort.
The different types of events are identified with a descriptor as shown in the table below.
Input goes into the Alarm State
Input Returns to Normal State
System Diagnostic for:
-Unit Configuration
-Disabled Alarms (Manual or Automatically)
-Acknowledged Alarms
-System Watchdog Faults
Refer to Appendix I for a complete list of diagnostic
events
Event associated with Time Clock
-Time Sync enabled
-Time sync lost
-Time Reset
At the top of the Event Log WEB page you will find buttons for downloading to a .csv file, erasing and
printing the log and setting the filters. The options are described below.
To Next Page
Loading...