Series 90B ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
Descriptor Filter:
In this dialog box you can set what descriptors you want to display in the event log. Multiple
descriptors may be selected. Place a check in the appropriate check box to enable that option.
Please refer to the following figure.
Figure E-9 Descriptor Dialog Box
Point Number(s) Filter:
Here you can set which points you want displayed in the events list. Multiple points may be selected
by using a comma between input numbers.
Figure E-10. Points Dialog Box
The Clear Filters button will remove the event filters that you configured and displays the latest
events.
To Next Page
Loading...