Ametek 90B Series - Display Module

12 Series 90B ANNUNCIATOR INSTALLATION AND CONFIGURATION MANUAL
Display Module
The Display Module provides the LED indication for up to 4 window sizes (Full Size,
Half, Third and Quad). Each display module plugs into one or two I/O cards, depending
on the window size and input quantities. There are several variations of display
modules as noted by the window size in the model number:
Version
Window Size, Configuration
1
1E, 2
2
2S, 2E, 4
3
3
4
1E, 2 (in CSM Cell)
There is no setup required for these modules. (Factory configured)