EasyManuals Logo

Ametek SEQUOIA Series Programming Manual

Ametek SEQUOIA Series
231 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Sequoia Series 107
Command Syntax PONSetup:PEAK:CURRent[:PROTection]
Parameters 0 | 1 | OFF | ON
Examples PONS:PEAK:CURR 1
Query Syntax PONS:PEAK:CURR?
Returned Parameters 0 | 1
Related Commands OUTP:PROT:DEL
PONSetup:PHASe[:ANGLe]
This command sets the initial phase angle of the power source relative to external reference.
Command Syntax [SOURce:]PONSetup:PHASe[:ANGLe <NRf+>
Parameters 360
Examples PONS:PHAS 0
Query Syntax PONS:PHAS?
Returned Parameters <NR2>
PONSetup:SYNChronize:FREQuency
This command programs the sync frequency level of the power source at power-on.
Command Syntax PONSetup:SYNChronize:FREQuency <NRf+>
Parameters 16 to 550 Hz
Unit Hz
Examples PONS:SYNC:FREQ 50
Query Syntax PONSetup:SYNChronize:FREQuency?
Returned Parameters <NR2>
Related Commands SYNC:FREQ?MIN, SYNC:FREQ?MAX
PONSetup:SYNChronize:PHASe
Phase Selectable
This command programs the sync phase level of the power source at power-on.
Command Syntax PONSetup:SYNChronize:PHASe <NRf+>
Parameters -360 to +360
Unit deg
Examples PONS:SYNC:PHAS 240
Query Syntax PONSetup:SYNChronize:PHAS?
Returned Parameters <NR2>
Related Commands SYNC:PHAS?MIN, SYNC:PHAS?MAX
PONSetup:SYNChronize:VOLTage
Phase Selectable
This command programs the sync voltage level of the power source at power-on.

Table of Contents

Other manuals for Ametek SEQUOIA Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ametek SEQUOIA Series and is the answer not in the manual?

Ametek SEQUOIA Series Specifications

General IconGeneral
BrandAmetek
ModelSEQUOIA Series
CategoryPortable Generator
LanguageEnglish

Related product manuals