Ametek SEQUOIA Series Programming Manual

122 Sequoia Series
Bit Configuration of Questionable Registers
Bit Position
7
6
5
4
3
2
1
0
Bit Name
AUX
DOWN
UVP
AC
FAULT
UNR
OT
PCL
CF
VF
Bit Weight
128
64
32
16
8
4
2
1
Bit Position
15
14
13
12
11
10
9
8
Bit Name
Not
Used
Not
Used
ISUM
CL
RMS
DC
FAULT
PFC
FAULT
RI
EXT
OVP
Bit Weight
32768
16384
8192
4096
2048
1024
512
256
VF over voltage protection has tripped
CF over-current protection has tripped
PCL Peak current fault
OT over-temperature protection has tripped
UNR Unregulated voltage
AC Fault AC Module fault
UVP Undervoltage protection tripped
AUX Down Auxiliary down
EXT OVP External reference voltage exceed limit
RI remote inhibit is active
PFC Fault Boost module fault
DC Fault DC to DC module fault
CL rms current limit is active
STATus:QUEStionable[:EVENt]?
This query returns the value of the Questionable Event register. The Event register is a read-only
register which holds (latches) all events. Reading the Questionable Event register clears it.
Query Syntax STATus:QUEStionable[:EVENt]?
Parameters None
Returned Parameters <NR1>(Register Value)
Examples STAT:QUES:EVEN?
Related Commands *CLS
STATus:QUEStionable:CONDition?
This query returns the value of the Questionable Condition register. This is a read-only register which
holds the real-time (unlatched) questionable status of the power source.
Query Syntax STATus:QUEStionable:CONDition?
Example STAT:QUES:COND?
Returned Parameters <NR1>(Register value)

Ametek SEQUOIA Series Specifications

General

Brand	Ametek
Model	SEQUOIA Series
Category	Portable Generator
Language	English