Ametek SEQUOIA Series Programming Manual

Sequoia Series 129
SYSTem:DATE
This command will set or return the current date in the format dd/mm/yy. Where the dd is the day of
the month mm is the month and yy is the year.
Command Syntax SYSTem:DATE
Parameters <string ?
Example SYST:DATE "24/10/15"
Quary syntax SYST:DATE?
Returned Parameters <SRD>
SYSTem:TIME
This command will set or return the current time in the format hh/mm/ss. Where the hh is the hour of
the day represent in 1 to 24, mm is the minutes and ss is the seconds
Command Syntax SYSTem:TIME
Parameters <string>
Example SYST:TIME "13/40/31"
Quary syntax SYST:DATE?
Returned Parameters <SRD>
SYSTem:RESET
This command will Reset all the configuration to default state
Command Syntax SYSTem: RESET
Parameters ALL | CAL | LIM | PONS | SYS
Example SYST: RESET PONS
SYSTem:LED[:STATE]
This command is used to Enable/Disable the Ambient LED Status feature.
Command Syntax SYSTem:LED
Parameters ON/OFF
Example SYST:LED ON
Quary syntax SYST:LED?
Returned Parameters <bool>

Ametek SEQUOIA Series Specifications

General

Brand	Ametek
Model	SEQUOIA Series
Category	Portable Generator
Language	English