AMI 1700 - Page 85

Rev. 2 67
Remote Interface Reference
Command Set Reference : Instrument Configuration Queries
Command: SOURCE:CURRent_LOOP?
Function: Returns a 0 if the 4-20 mA Current Loop Output is disabled, a
1 if it is configured for the nitrogen channel, and a 2 if it is
configured for the helium channel.
Returns: 0, 1, or 2<CR><LF>
Default: 0
Command:
NAME:SENSor:N2?
Function: Returns the name of the nitrogen level sensor.
Returns: <string><CR><LF>
Default: Nitrogen Level
Command:
SERial_NUMber?
Function: Returns the serial number of the instrument.
Returns: <string><CR><LF>
Default: N/A
Command:
HardWare_VERsion?
Function: Returns the hardware version of the instrument.
Returns: <string><CR><LF>
Default: N/A
Command:
DATE_MANUFacture?
Function: Returns the date of manufacture of the instrument.
Returns: <string><CR><LF>
Default: N/A
Command:
FirmWare_VERsion?
Function: Returns the firmware version of the instrument.
Returns: <string><CR><LF>
Default: N/A
Command:
HElium_PowerSupply?
Function: Returns the helium power supply configuration of the
instrument where 0 is not installed, 1 is standard, and 2 is XL
version.
Returns: 0, 1, or 2<CR><LF>
Default: N/A