AMI 1700 - Page 89

Rev. 2 71
Remote Interface Reference
Command Set Reference : Configuring Setpoints
Command: CONFigure:SOURCE:REC_OUT <value>
Function: Configures the 0-10 Vdc Recorder Output’s source to disabled (0),
assigned to the nitrogen channel (1), or the helium channel (2).
Returns: <CR><LF>
Default: 0
Command: CONFigure:SOURCE:CURRENT_LOOP <value>
Function: Configures the 4-20 mA Current Loop’s output source to disabled (0),
assigned to the nitrogen channel (1), or the helium channel (2).
Returns: <CR><LF>
Default: 0
Command: SAVE
Function: None. Allows Model 18x and Model 13x backwards compatibility.
Returns: <CR><LF>
Default: N/A