EasyManua.ls Logo

Anritsu MT1040A - Page 248

Anritsu MT1040A
684 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Selecting the Renew lease when link is reestablishedRenew lease when link is reestablished check box enables the
function that automatically renews the lease when the link is reestablished.
Selecting the Get gateway servers through DHCPGet gateway servers through DHCP check box enables the
function that automatically assigns the gateway.
Selecting the Get DNS setup through DHCPGet DNS setup through DHCP check box enables the function
that automatically assigns the DNS server.
Primary DNSPrimary DNS and Secondary DNSSecondary DNS allow you to define these IPv4 addresses for
the specific stream.
When allocating IP addresses using DHCP, it is 'leased' for a certain period of
time defined by the network. The time when the lease expires is indicated as
Current lease expire time
.
Touching the Renew nowRenew now button will renew the allocation of the IP address.
Touching the CloseClose button closes the dialog box.
GatewayGateway
Select the EnableEnable check box to enable the use of a gateway. When gateway is
enabled and the destination address falls outside the network mask, an ARP
lookup for the gateway IP address will be made. The resulting MAC address is
used as destination. Gateway is usually used with ARP enabled as well.
Touching SetupSetup next to the EnableEnable check box will open the Gateway SetupGateway Setup
dialog box.
Default gatewayDefault gateway: Set the IP address for the default gateway.
Network maskNetwork mask: Set bits, which are used for network mask, to "1" consecutively
from the first bit.
Example
Default gateway 128.15.0.1
Network mask 255.255.0.0
In this example, the first eight bits (portion of 128.15) will be a network
address.
Ethernet ApplicationsEthernet Applications
248248

Table of Contents

Related product manuals