Combination of Ql Type and QlCombination of Ql Type and Ql
G.781 G.781
option Ioption I
G.781 G.781
option IIoption II
G.781 G.781
option IIIoption III
G.8264G.8264
QL-INV0 QL-STU QL-UNK QL-INV0
QL-INV1 QL-PRS QL-INV1 QL-INV1
QL-PRC QL-INV2 QL-INV2 QL-INV2
QL-INV3 QL-INV3 QL-INV3 QL-INV3
QL-SSU-A QL-TNC QL-INV4 QL-INV4
QL-INV5 QL-INV5 QL-INV5 QL-INV5
QL-INV6 QL-INV6 QL-INV6 QL-INV6
QL-INV7 QL-ST2 QL-INV7 QL-INV7
QL-SSU-B QL-INV8 QL-INV8 QL-INV8
QL-INV9 QL-INV9 QL-INV9 QL-INV9
QL-INV10 QL-ST3 QL-INV10 QL-EEC2
QL-SEC QL-INV11 QL-SEC QL-EEC1
QL-INV12 QL-SMC QL-INV12 QL-INV12
QL-INV13 QL-ST3E QL-INV13 QL-INV13
QL-INV14 QL-PROV QL-INV14 QL-INV14
QL-DNU QL-DUS QL-INV15 QL-INV15
VLANVLAN
Select the checkbox to set up VLAN for SyncE packets.
When the VLAN level count is 2, the two VLAN levels will be designated S-
VLAN and C-VLAN. S-VLAN is short for Service provider VLAN and C-VLAN is
short for Customer VLAN.
EthertypeEthertype select an Ethertype of the first MAC header.
Level countLevel count Up to eight levels of VLAN can be inserted in the frame. The
number of VLAN fields is selected through the Level countLevel count drop-down menu,
and each level is set up individually.
IDID Touching the IDID (VLAN ID) button launches a setup dialog box from which it
is possible to set up a denoting of the virtual LAN.
DEIDEI Selecting the DEIDEI check box sets a 1-bit flag denoting whether MAC
addresses inside the frame are in canonical format.
PriorityPriority It is possible to set up the priority level of each frame.
EthertypeEthertype When the Level count is more than one, select the type from
0x81000x8100, 0x88A80x88A8, 0x91000x9100 or 0x92000x9200.
The higher layer protocol number is displayed in the lowest line.
Src MACSrc MAC
Allows you to specify the MAC address to be used in ESMC messages. You can
either use the DefaultDefault check box to force an instrument-specific default value,
or touch the address field to enter an address yourself.
To Next Page
Loading...
