Test DirectionsTest Directions
GraphicalGraphical
presentationpresentation
DSCP/TOSDSCP/TOS
Touch the fields to set a Diffserv or TOS codepoint to be included in IPv4
headers belonging to the connection.
Traffic classTraffic class
Touch the fields to set a Traffic class of IPv6 headers.
Flow labelFlow label
Touch the fields to set a Flow label of IPv6 headers.
DSCP/TOS appears if Layer 3 in Stream Setup is set to IPv4IPv4.
Traffic class and Flow label appear if Layer 3 in Stream Setup is set to IPv6IPv6.
Application NameApplication Name
Touch the fields to set a text string that identifies the application on the port
number (for reporting purposes only). For example, HTTP, POP3, etc.
66..1010..33 Test ResultsTest Results
Local -> Remote
Remote -> Local
Local -> Remote of Both Directions
Remote -> Local of Both Directions
The results of the performed RFC 6349 tests can be presented in either tabular
form or as graphical representations. The graphical presentation mode provides
an overview of the results and the progress of the test.
66..1010..33..11 SummarySummary
When you go to the test results of the Ethernet RFC 6349 application, the
following screen is displayed.
This screen presents the summary of current measurement values.
Local -> RemoteLocal -> Remote: Shows the results of Upstream (Local to Remote) test.
Remote -> LocalRemote -> Local: Shows the results of Downstream (Remote to Local) test.
To Next Page
Loading...
