Test TimeTest Time
1111..22 GPSGPS/GNSS/GNSS
GPS/GNSS application logs NMEA format data received from the GPS receiver or the
GNSS receiver. According to the NMEA format data, the locations of satellite are
displayed on the chart.
GPS: Global Positioning System
GNSS: Global Navigation Satellite System
1111..22..11 Test SetupTest Setup
When you go to the test setup of the GPS application, the following screen is
displayed.
Select the how to stop the test.
Log until buffer is fullLog until buffer is full: The test stops when the buffer memory is full with the
log data. Even though the logging time changes depending on the number of
receiving satellites, it takes 72 hours minimum to buffer full.
Timed (or until buffer is full)Timed (or until buffer is full): The test stops when the specified time has
elapsed or when the buffer memory has become full.
Days, Hours, MinutesDays, Hours, Minutes
Touch the field to set the test time.
To Next Page
Loading...
