SimultaneousSimultaneous
measurement portsmeasurement ports
Port Status LEDPort Status LED
Frequency variableFrequency variable
rangerange
Electrical OutputElectrical Output
Battery operating timeBattery operating time
OperatingOperating
temperature andtemperature and
humidity rangehumidity range
Storage temperatureStorage temperature
and humidity rangeand humidity range
CPRI1: 614.4 Mbit/s SFP
CPRI2: 1228.8 Mbit/s SFP
CPRI3: 2457.6 Mbit/s SFP
CPRI4: 3072.0 Mbit/s SFP
CPRI5: 4915.2 Mbit/s SFP+
CPRI6: 6144.0 Mbit/s SFP+
CPRI7: 9830.4 Mbit/s SFP+
CPRI8: 10137.6 Mbit/s SFP+
CPRI9: 12165.12 Mbit/s SFP+
CPRI10: 24330.24 Mbit/s SFP28
OBSAI 1x: 768 Mbit/s SFP
OBSAI 2x: 1536 Mbit/s SFP
OBSAI 4x: 3072 Mbit/s SFP
OBSAI 8x: 6144 Mbit/s SFP+
Simultaneous measurement using two ports is available.
(Available for QSFP28, QSFP+, SFP28, SFP, SFP+, or RJ45 interface.)
Yellow Link
Green: Activity (flashing)
Range *: Relative to Bit Rate: −200ppm to + 200ppm, 0.1ppm step
Performance is not guaranteed when the frequency is out of the optical
module's specification.
Sync Clock Output
Divided clock output synchronized with
QSFP28/SFP28 transmit data
Only the port 1 is supported.
Frequency *
100GbE/25GbE:
OTU4:
Divided 1/8 or 1/16 from Lane Bit rate:
3.22265 GHz (1/8), 1.61133 GHz (1/16)
3.49406 GHz (1/8), 1.74703 GHz (1/16)
Level 350 mVp-p min.
900 mVp-p max.
Connector SMA female
Termination 50 Ω, AC coupling, single-end
1212..22..33 Environment PerformanceEnvironment Performance
Operating time: 1 hours (typ.)
25°C, when this module is attached to MT1040A.
0°C to +40°C, ≤85%RH (non-condensing)
−30°C to +60°C, ≤90%RH (Excluding battery and AC adapter)
−20°C to +50°C, ≤90%RH (Including battery and AC adapter)
(non-condensing)
To Next Page
Loading...
