Allows you to specify saving method of the measurement results.
PromptPrompt: Confirms saving results or not after a test.
OnOn: Saves results to the file automatically without notification every time a test
ends.
NoneNone: Does not save results. The results data are discarded if you do not save
the data manually.
System PasswordSystem Password
Allows you to enable/disable password protection and to specify a new
password. When the password protection is enabled, starting applications and
editing applications are protected.
To change/set the password, select the one or more check boxes and then
touch the OKOK button. A numeric keypad is displayed.
To see the numbers as you type them on the keypad, select the DisplayDisplay
PasswordPassword check box.
The password is set to 0614 as factory default.
Date/TimeDate/Time
Allows you to change the system date and time. Select a part in New TimeNew Time or
New DateNew Date field and touch the up/down button.
To Next Page
Loading...
