GeneralGeneral
The GeneralGeneral screen contains the following configuration options:
LCD BrightnessLCD Brightness
Allows you to change the screen brightness by using the slide bar.
PowerPower
Allows you to specify auto backlight duration and auto power-off time.
These settings are applied for the battery operation only.
When Wireshark application is running, Auto Backlight OffAuto Backlight Off does not work.
Touch Screen CalibrationTouch Screen Calibration
Allows you to calibrate the touch screen. Touch OKOK in the dialog box to start
the calibration.
Save the measurement results or settings before the touch screen calibration. The
Network Master reboots after the touch screen calibration. The measurement data
which is not saved will be lost.
When operating with the battery, the Network Master does not reboot.
LanguageLanguage
Allows you to select language for the screens, and the keypad layout.
SoundSound
The Sound button does not appear for MT1040A.
Even if the sound icon below is displayed on some screen copies in this manual, the
sound icon does not appears on the actual screen of MT1040A.
This icon indicates that the speaker is On.
This icon indicates that the speaker is Off.
Auto SaveAuto Save
To Next Page
Loading...
