To Next PageTo Next Page
Need help?Do you have a question about the Anritsu S412E and is the answer not in the manual?
General| Dynamic Range | > 100 dB |
|---|---|
| Battery Life | 4 hours |
| GPS | Optional |
| Measurement Functions | Return Loss, VSWR, Cable Loss, Distance-to-Fault (DTF) |
| Display | 5.7 inch color LCD |
| Impedance | 50 Ω |
| Return Loss | 0 to 60 dB |
| VSWR | 1.0 to 65 |
Details the LMR Master's capabilities, features, available models, and options.
Covers proper handling, cleaning procedures, and connector care for the instrument.
Discusses the importance of RF calibration and periodic verification for measurement accuracy.
Details the instrument's front panel controls, including keys and indicators.
Identifies and describes the various connectors on the instrument's test panel.
Details how to access and select different measurement modes.
Offers quick start steps for VNA mode, including display options and measurements.
Details quick start procedures for setting up and using the Spectrum Analyzer.
Provides quick start instructions for configuring and using the NBFM Analyzer.
Guides quick start for digital LMR analysis modes like P25, NXDN, and TETRA.
Covers procedures for saving, recalling, copying, and deleting files.
Explains the main options within the System menu, such as Status and Self Test.
Details configuration options specific to different measurement modes like VNA and SPA.
Covers general instrument settings like Date/Time, Ethernet, and Language.
Describes procedures for resetting the instrument to factory defaults or master reset.
Details the process for updating the instrument's operating system firmware.
Explains how to connect the instrument via a network or direct Ethernet connection.
Details LAN connection setup and Ethernet configuration parameters.
Explains how to connect the instrument via LAN or a Wi-Fi portable router.
Describes the web interface, modes, and controls for remote operation.
