1-6 Recommended Test Equipment General Information
1-4 PN: 10580-00303 Rev. D Model MS20xxB MM
1-6 Recommended Test Equipment
The following test equipment is recommended for use in testing and maintaining Anritsu VNA Master Models
MS2024B, MS2025B, MS2034B, and MS2035B. Table 1-4 on page 1-4 is a list of test equipment that is
recommended for verifying the vector network analyzer functions and associated VNA options. Table 1-5
on page 1-5 is a list of test equipment that is recommended for verifying the spectrum analyzer functions and
associated SPA options. Table 1-6 on page 1-6 is a list of test equipment that is recommended for verifying the
functions of installed options.
Vector Network Analyzer Test Equipment
Table 1-4. Test Equipment Recommended for Vector Network Analyzer Verification
Instrument Critical Specification
Recommended
Manufacturer/Model
Frequency Counter Frequency: 2 to 3 GHz Anritsu Model MF2412C
Frequency Reference Frequency: 10 MHz Symmetricom RubiSource T&M
Open/Short/Load Frequency: DC to 6 GHz
Connector: N(m)
Anritsu Model OSLN50-1
Open/Short/Load Frequency: DC to 6 GHz
Connector: N(f)
Anritsu Model OSLNF50-1
RF Coaxial Cable Frequency: DC to 18 GHz
Impedance: 50 ohm
Connector: N(m) to N(m)
Anritsu Model 15NN50-1.0B
6 dB Offset Termination Frequency: DC to 6 GHz
Connector: N(m)
Anritsu Model SC7424
20 dB Offset Termination Frequency: DC to 6 GHz
Connector: K(m)
Anritsu Model SC7423
Coaxial Cable Connector: BNC(m) to BNC(m)
Impedance: 50 ohm
Anritsu 2000-1627-R
Interface Cable USB A to USB mini Anritsu 3-2000-1498
Test Software Anritsu 2300-535
PC Controller Microsoft Windows XP, 1 GB RAM, at
least 20 MB free hard disk space,
USB 2.0 Type A port with National
Instruments VISA
a
Version 3.6 or later
loaded
a.National Instrument VISA license is available from National Instruments as a stand-alone software package or as part of
National Instruments GPIB adapter hardware package. Please contact National Instruments for details.
Any
To Next Page
Loading...
