Characteristics.
- speed value adjustable from 5 to 2500 Rpm with value always referring
to drill, regardless of reduction ratio (reducers from 20:1 to 1000:1),
- torque adjusting range; 0.5 to 55.0 Ncm for certified reducers, or 1 to
100%,
- reduction ratio customizable list,
- alarm signal upon reaching the maximum set torque,
- setting button during motor rotation.
Menu with micromotor extracted but not active.
All icon buttons are active and all available functions can be edited (see
paragraph 5.5.).
any edited setting or value will be automatically saved inside
the selected working programme (ex. P1).
Hereinafter is the list of the acronyms of the types of certified contra
angles indicated on the TOUCH DISPLAY:
To Next Page
Loading...