Anthos A7 Plus - Equipment Description and Setup; IDENTIFICATION PLATES AND DENTAL UNITS

A7 Plus – OPERATOR'S MANUAL
EN
9
2. DESCRIPTION OF THE EQUIPMENT
2.1. IDENTIFICATION PLATES
The plate is found on the arm between the dental chair and water unit.
Data given on plate:
• Manufacturer’s name.
• Name of equipment.
• Rated voltage.
• Type of current.
• Nominal frequency.
• Maximum absorbed power.
• Serial number.
• Month and year of manufacture.
2.2. DENTAL UNITS
Models:
A7 PLUS CONTINENTAL version.
CONTINENTAL version dentist's board (instruments will return to their
original positions through the pulling action of the spring-operated arms)
attached to a double supporting arm, one of which is articulated and self-
balancing.
Description of the different parts:
a Water unit.
b Adjustable arm.
c Dentist's board.
d Dentist’s control console.
e Tray holder board.
f Assistant’s board.
g Assistant’s board control console.
h Connection box.
i Multifunction foot control.
l Water-to-cup spout.
m Bowl.
n Self-balancing arm.
q Tray holder board on assistant's board (optional).
z ANTHOS A2.7 dental chair.
A7 Plus INTERNATIONAL version.
INTERNATIONAL version dentist's board (instruments placed vertically
in appropriate seats) attached to a double supporting arm, one of which
is articulated and self-balancing.
Description of the different parts:
a Water unit.
b Adjustable arm.
c Dentist's board.
d Dentist’s control console.
e Tray holder ( optional ).
f Assistant’s board.
g Assistant’s board control console.
h Connection box.
i Multifunction foot control.
l Water-to-cup spout.
m Bowl.
n Self-balancing arm.
q Tray holder board on assistant's board (optional).
z ANTHOS A2.7 dental chair.