Anyview A6 - Page 211

Patient monitor User’s manual
Chapter 22-3
3. After you have finished the data input, please make sure they are correct.
Then you can press the button 【 Calculation 】 to get all the output
parameters’ value.
4. In the Calculation Step window, you can:
a) Select【Range 】, the unit of each parameter disappears, and the unit of
the parameter in red word will be changed into the logical range of
them. The option has been changed into
【
Unit
】
, select
【
Unit
】
to
redisplay the unit of each parameter.
b) Select【Record】to print the current page out.
c) Select
【
Show Input
】
to display the corresponding input value of the
current calculation result.
Note:
 If there is a sign of “---” in the output parameter, it means the
parameter is invalid in this calculation.
 If the output parameter is red, it means the parameter is beyond the
logical range.
22.2.2 Input Parameters
Abbreviation
Unit
Full Name
C.O.
L/min
cardiac output
HR
bpm
heart rate
PAWP
mmHg
pulmonary artery wedge pressure
Art Mean
mmHg
mean artery pressure
PA Mean
mmHg
mean pulmonary artery pressure
CVP
mmHg
central venous pressure
EDV
ml
end diastolic volume
Height
cm
height
Weight
kg
weight
