Patient monitor User’s manual
Chapter 2-3
Put the monitor in a location where you can easily see the screen and
access the operating controls.
Keep this manual in the vicinity of the monitor so that it can be
obtained conveniently when needed.
The software was developed in compliance with IEC 60601-1-4. The
possibility of hazards arising from software errors is minimized.
This manual describes all features and options. Your monitor may not
Warning: The monitor is neither a therapeutic instrument nor a
device that can be used at home.
1
．
Safety precautions for installation
Connect the power cord to a properly earthing socket. Avoid putting the
socket used for it in the same loop of such devices as the air conditioners,
which regularly switch between on and off.
Avoid putting the monitor in the locations where it easily shakes or
Enough space shall be left around the monitor so as to guarantee normal
Make sure the ambient temperature and humidity are stable and avoid the
occurrence of condensation in the operation process of the monitor.
Warning: Never install the monitor in an environment where
flammable anesthetic gas is present.
2. Monitor conforms to the safety requirements of IEC 60601-1. This monitor
is protected against defibrillation effects.
3. Notes on symbols related to safety
Type BF applied part, defibrillation protected
To Next Page
Loading...
