Anyview A6 - 22.6 NIBP Analyze

Patient monitor User’s manual
Chapter 22-9
22.5.3 Output Parameters
Abbreviation
Unit
Full Name
BSA
m
2
body surface area
VO2 calc
ml/min
oxygen consumption
C(a-v)O2
ml/L
arteriovenous oxygen content difference
O2ER
%
oxygen extraction ratio
DO2
ml/min
oxygen transport
PAO2
mmHg
partial pressure of oxygen in the alveoli
AaDO2
mmHg
alveolar-arterial oxygen difference
CcO2
ml/l
capillary oxygen content
Qs/Qt
%
venous admixture
C.O.calc
L/min
calculated cardiac output
22.6 NIBP Analyze
Ambulatory blood pressure monitoring is a technology that measures blood
pressure in daily life automatically and discontinuously. It reflects the level,
difference and rhythm of blood pressure.
Select 【 Main Menu 】 smartkey→ 【 Calculation 】 , then select 【 NIBP
Analyze】enter the NIBP analyze setting menu.
22.6.1 Set Time Length
Select【Time Length】of the【NIBP Analyze】 menu, you can set the time
length of blood pressure monitoring,options are 【24h】,【48h】.
22.6.2 Set Time Interval
Select
【
Time Inter
】
of the
【
NIBP Analyze
】
menu, you can set the time
interval of NIBP analysis, Options are
【
5 min
】
,
【
10 min
】
,
【
15 min
】
and
【30 min】.
22.6.3 Analysis Step
1. Select【Start Anal】of the【NIBP Analyze】 menu，begin the ambulatory
blood pressure analysis.
2. Select 【Anal. Result】of the【NIBP Analyze】menu，the NIBP analysis
result can be display . The NIBP analyze results is as follows: