Patient monitor User’s manual
Chapter 5-4
1) Technical alarm messages are displayed in the technical alarm area.
2）The “*” symbol before the alarm message match the alarm level as follows:
3）The background color for the alarm message is blue.
1) Prompt messages are displayed in technical alarm area or the corresponding
2) Prompt messages have no color and visual and audible alarm indication.
When multiple alarms occur at the same time, the alarm messages will be
displayed in the alarm area in turn.
When a physiological alarm occurs, the numeric of parameter flashes.
The alarm sound is off.
The alarm is suspended.
The parameter alarm is off.
Select【Main Menu】smartkey→【Alm Setup】→【Alm Volume】, you
can set the alarm volume of system. The volume can be set to a value between
X and 10. X is the minimum alarm volume and 10 is the maximum volume.Or
select【Volume】smartkey→【Alm Volume】to set the alarm volume. Or select
【Alm】smartkey→【Alm Volume】 to set the alarm volume
The setup for parameter alarm is in their setting menus. In the menu for a
specific parameter, you can view and set the alarm limit, alarm status. The
To Next Page
Loading...