Patient monitor User’s manual
Chapter 5-6
Warning: Medical personnel should set the alarm limits of
parameters in line with the clinical environment and
existing clinical experience. Before monitoring, please
confirm whether the alarm setting is suitable for the
monitored patient.
Select【Silence】smartkey, a message window will prompted that whether
Set【 Yes】 to enter the silence status. That is, all the sound of system is
Set 【 No 】 not to be silence. That is, all the sound of system to exit the
When in the silence status, the alarm indicators are valid except audible
alarm. The system sound includes alarm sound and QRS sound.
Note: When in the silence status, the icon will be displayed in the
upper right corner of screen.
Press the button on the front panel of monitor, you can suspend all alarm
indicators of the monitor:
——The visual alarm and audible alarm are all suspended.
——The parameters of physiological alarm stop flashing.
——The alarm message in the physiological alarm area will not be displayed.
——The remaining time and the icon will be shown in the physiological
——The technical alarm message will still be shown in the technical alarm
After the alarm paused time, press the button again, the alarm pausing can be
cancelled by manual operation.
After returning to the normal status, whether the alarm still exists is
To Next Page
Loading...
