Anyview A6 - Chapter 4 User Interface; 4.1 Display Style

Patient monitor User’s manual
Chapter 4-1
Chapter 4 User Interface
4.1 Display Style
Display style of user interface can be set according to your need.
Including:
——
Defined the screen layout, setup the parameter and wave to be displayed;
——Manage the screen layout;
——Display the alarm limit;
——
Display color of wave and parameter:
——Sweep mode of wave.
4.1.1 Screen Layout
You can set the Standard and the Big Numerics screen layout as you like.
The parameters or the arrangement of those parameters can be user-defined.
1. Select【Main Menu】smartkey→【Screen Setup】;
2. Set 【 Screen Layout 】 to select or close the parameters, and set the
arrangement of those parameters you want to display on the screen.
The waves will be changed with the parameters at the same time.
4.1.2 Screen Layout manage
1. Select
【
Main Menu
】
smartkey→
【
Screen Setup
】
;
2. Set 【Screen Layout Manage】, you can select, save or delete what you
have setup.
4.1.3 Alarm Limit Display
1. Select【Main Menu】smartkey→【Screen Setup】;
2. Click 【LimitDisplay】， you can select【Off】or 【On】to choose whether
display the alarm limit or not.
4.1.4 Parameter Color
1. Select【Main Menu】smartkey→【Screen Setup】;