Anyview A6 - Page 244

Patient monitor User’s manual
5
Operating time
One new and fully charged battery at 25℃ ambient
temperature, connecting SpO
2
sensor and NIBP work on
AUTO mode for 15 minutes interval.
AnyView A8/A6: ≥60 minutes
AnyView A5: ≥150 minutes
AnyView A3: ≥200 minutes
Charge time
6h to 100%
（
Standby
）
Turn off delay
5 min -15 min after the low battery alarm first occurs.
Indicator of battery
capability
With
A.5.4 Mainframe LED
Physiological alarm
indicating lamp
1 (Yellow/Red)
Technical alarm
indicating lamp
1 (Blue /Yellow)
Power indicating
lamp
1 (Green/Orange)
When powered with AC, it lights green while turn on
and off the monitor.
When powered with battery, it lights orange only while
turn on the monitor.
Battery charging
indicating lamp
1 (Orange)
A.5.5 Audio indicating
Speaker
Gives audible alarm, QRS tone；
Supports Pitch Tone and multi-level volume;
Alarm tones meet the requirement of IEC 60601-1-8.
Alarm pressure
45 dB to 85 dB. Testing place is 1 meter from the tone.