APRILIA RSV4 Factory a-PRC 2009 User Manual

•
1 Exhaust valve actuator
•
1 Oxygen sensor
•
2 Fans
•
1 Right handlebar control
•
1 Left handlebar control
•
1 Shift control
•
1 Regulator
•
1 Demand sensor
•
1 Variable geometry control unit
•
1 Battery
•
1 Tone wheel reading control unit
•
1 SensorBox
•
1 QuickShift
Small parts and mountings
•
6 Large black 290x4 clamps
•
14 Small black 160x2.5 clamps
•
5 Rubber clamps
•
2 TBEI M6x30 screws
•
2 TE M6x20
•
1 flanged TE 6x16 screw
•
2 M5x8 screws
•
2 TBEI M5x16 screws
•
1 TE M6x30 screw
•
3 Self-tapping 5x14 screws
•
2 flanged TBEI M5x9 screws
•
1 M6 nut
•
2 Flanged self-locking M6 nuts
•
10 Cable grommet (there are various types of cable grommets)
•
3 Cable guides
•
5 Relay socket rubber rings
•
11 Rubber block (there are various types of rubber blocks)
•
1 Rubber ring for the protection relay
•
1 Rubber ring for the fall sensor
•
1 AMP Superseal connector mounting
•
1 Relay/fall sensor mounting
•
1 Battery mounting bracket
•
2 T-shaped bushing (there are various types of T-shaped bushings)
Electrical system RSV4 Factory a-PRC
ELE SYS - 100

APRILIA RSV4 Factory a-PRC 2009 Specifications

General

Brand	APRILIA
Model	RSV4 Factory a-PRC 2009
Category	Motorcycle
Language	English