TABLE E1 - REAR SWINGARM AREA
25. Rubber clamp
26. Rear brake switch cable harness
27. Speed sensor cable harness
TABLE E2 - REAR STOP SWITCH AND SPEED
SENSOR CABLE HARNESS ROUTING ON THE
RIGHT SIDE
28. Cable grommet
29. Speed sensor cable harness
30. Rear brake switch cable harness
TABLE F0 - REAR SADDLE MOUNTING AREA
30C. Fit the (individual) fan fuse on battery mounting bracket tongue
30D. Fuse-box positioning on battery mounting bracket
30E. Insert the fuse-box in the two tongues on the battery mounting bracket
RSV4 Factory a-PRC Electrical system
ELE SYS - 135