APRILIA RSV4 Factory a-PRC 2009 User Manual

•
Install both chain sliders and fasten
them with the specific screws.
NOTE
THIS ENGINE HAS CAMSHAFTS OF THE EXHAUST
VALVES WITH CLEARANCE RECOVERY.
•
Install the intake and exhaust camshafts on the rear head, remembering that:
the intake camshaft gear tooth (indicated with a dot) is inserted in the groove of the exhaust camshaft
gear (indicated with two dots).
CLEAN THOROUGHLY THE SEATS OF THE GEAR RETAINER SCREWS, ON THE INTAKE CAM-
SHAFT.
RSV4 Factory a-PRC Engine
ENG - 339

APRILIA RSV4 Factory a-PRC 2009 Specifications

General

Brand	APRILIA
Model	RSV4 Factory a-PRC 2009
Category	Motorcycle
Language	English