• I.S. Zone*: enable/disable - Enables/disables an intrinsically safe zone.
(The number of device LED's for this zone
is limited to 2).
• Coincidence: - Indicates that two or more devices have
triggered a fire alarm.
-
112 Zones are provided for control purposes.
Depending on the configuration, 16/64, 32/128, 48/192 or 64/255 zones can be
displayed on the FP2000 front panel. It might happen that devices are allocated to
zones outside the "visible" range of the fire panel, and no zone LED will illuminate when
these devices go into alarm! Therefore, these zones should not be used for fire sensors,
unless remote zone indicators are used.
*Depending on the communications protocol, this option is not always available.
To Next Page
Loading...
Need help?
General
