Global repeaters
(NETWORK, 3, )
GLOBAL REPEATERS
G-Repeater No. :1
Status :dis
^V, <>, E, X
Alarms: 0 Faults: 1 Cond.: 0 P: 1 FDZ
Return to Network Menu Page 41
or 0..9 to select master number
Move to status field
Toggle NET1 check/NET2 check/NET1 no check/NET2 no check (Unlock memory!)
Confirm entry
The global repeaters and global zone repeaters that will communicate with this FP2000
panel on the network, must be assigned.
Global repeaters that are assigned to the network will be checked for communication on
the system. If a global repeater is assigned to "NET1/2 check", a fault warning will be
displayed in the event of a failure, but if assigned to "NET1/2 no check", the failure will
only be an action logged in the event buffer.
To Next Page
Loading...
