Memory allocation 2
(CONFIGURATION, 2, , )
MEMORY ALLOCATION
Loop Devices Text Loop Devices Text
1 128 80 5 0 0
2 128 80 6 0 0
3 0 0 7 0 0
4 0 0 8 0 0
more X
Alarms: 0 Faults: 0 Cond.: 0 P: 1 SDZ
Return to Configuration Menu Page 26
Press [More ] to view Memory Allocation 1 Page 33
The amount of RAM memory allocated to field devices on the loops is viewed with this
screen. Provision is made for 80 characters of user text for each device. It is not possible
to change the amount of memory allocated. Allowance is always made for 126 or 128
devices per loop irrespective of the number of devices actually installed. The amount of
memory used is dependent only on the number of loops equipped within the fire panel.
When exiting from this menu, the user is prompted as to whether the allocation is to be
saved or not. This prompt will occur even if no parameters have been changed. If the
allocation is saved then all RAM is cleared and the fire panel must be reprogrammed.
Press for no save
Press for YES and then in order to save the allocation (Unlock memory!)
To Next Page
Loading...
Need help?
General
