Aritech FP2000 Series Reference Guide

Input definition – type Device
(INPUT/OUTPUT, 1, )
INPUT DEFINITION State :false
Input :1 Trig. :latched
Type :Device Mode :active
Addr. :1/4 :OPT continuous
Fct. :Fire Event unlogged
^V, <>, E, X
Alarms: 0 Faults: 0 Cond.: 0 P: 1 SDZ
Return to Input/Output Menu Page 109
Place cursor at TYPE
Select Type: DEVICE and press (Unlock memory!)
Use number or and press to select the function and input channel number
*See Common Facilities - All Input Types, Page 111 for description of Input, State,
Trigger, Mode, Event, and Test
The selected input number is activated by a field (loop) device fire, fault or condition. A
fire function is only valid for devices that would normally create a fire alarm (e.g. smoke
detector, manual call point or zone monitor unit).
The device is defined by its loop/address as well as the function (fire, fault or condition).
The device type is confirmed on the screen when the loop/address is entered.
List of Functions:
Fire
Fault
Condition
Trigger: Latched/Unlatched
Mode: Passive/Active
Always continuous
Event: Unlogged
Text: Not applicable
* See Input Description in the Serial Communication Format

Aritech FP2000 Series Specifications

General

Brand	Aritech
Model	FP2000 Series
Category	Fire Alarms
Language	English