Device menu
(MAIN MENU, 2, )
DEVICE MENU
1 Setup 2 Zones
3 Areas 4 Zone Graphics
5 Device Graphics 6 Zone Range
0. . 9, <>, E, X
Alarms: 0 Faults: 0 Cond.: 0 P: 1 SDZ
Enter number or use and press
Return to Main Menu Page 23
1 Setup
General setting up and viewing of devices - all types Page 79
Smoke and Heat Detectors Page 83
Manual Call Point, Call Point Warning, Call Point Monitor,
Gas Unit Call Point Page 85
Sounder Circuit Controller Page 87
Indicating Circuit Controller Page 89
Monitor Units - Zone Monitor Unit and Control Unit Monitor Page 90
I/O Units - Single and Three Channel, Switch Monitor Unit Page 92
Gas Unit (I/O) Page 94
Setup individual device parameters and view device statistics
2 Zones Page 96
Assign individual zone operating conditions — Enable/Disable,
Mode, Area, On/Off Day/Night Mode, Sounder Delay, and
Fire Brigade Delay.
3 Areas Page 99
Define adjacent areas to an area, log or unlog coincidence, and
enable or disable the area.
4 Zone Graphics Page 101
View a bar graph of the monitoring sensors in a zone.
5 Device Graphics Page 104
View a line graph of an individual sensor with time.
6 Zone Range Page 108
Enables configuration of zone offset.
To Next Page
Loading...
Need help?
General
