• Coincidence: logged/unlogged - Area coincidence occurs if two or more
zones assigned to the area have a fire
alarm. The area coincidence can be used
as an input for I/O switching. When viewing
this menu, the word COINCIDENCE will
flash if the area is in a coincidence state.
When logged, the coincidence is reported
in the Event Buffer.
• Adj1 - Adj5: 0—99 - Up to five other areas can be defined as
being adjacent to the area.
• Text: 40 Chars - Each area can have 40 characters of user
text assigned. This text is used with any
reports or logs generated.
To Next Page
Loading...
Need help?
General
