Aritech FP2000 Series Reference Guide

• Disp: Select the type of data that must be
recorded for the device
Value - The current values of the device
FldAvg - The average value of the device
Test Val - The device test value
High - Highest value achieved by the device
Low - Lowest value achieved by the device
Contam - % Contamination of the device
CommQlt - % Communication quality of the device
*See Page 83, Device Statistics
-
The device value is the only parameter that is scanned by the panel at a fast rate.
All other statistics are updated once every 20 minutes. It is therefore pointless to
sample any statistic other than the device value at a rate faster than 1/20 min.
When 1/day is selected, then the time that the sample is taken is that set in the Test
Times of the Maintenance Menu (Page 157).

Aritech FP2000 Series Specifications

General

Brand	Aritech
Model	FP2000 Series
Category	Fire Alarms
Language	English