APPENDIX B
UPGRADE: VER3.XX TO VER 4.00 VER 3.00 VER 4.00
HARDWARE CONFIGURATION 1 4-6 27
COMMUNICATIONS MENU 4-15 37
MODEM ALARM REPORT 2 4-25 47
RD6000 MENU 4-30 -
CLEAR SITE DATA 1 4-35 62
DEVICE MENU 4-51 78
GENERAL SETUP AND VIEW (ALL TYPES) 4-53 79
GENERAL SETUP AND VIEW (ALL TYPES) 4-54 79
INDICATING CIRCUIT CONTROLLER - 89
INDICATING CIRCUIT CONTROLLER - 89
I/O UNITS 4-64 92
I/O UNITS 4-65 92
ZONE MENU 4-68 96
INPUT DEFINITION 4-98 114
OUTPUT ASSIGNMENTS - 131
TYPE INTERNAL 4-106 134
TYPE DEVICE OUTPUT 4-108 135
TYPE SUPERVISED INTERNAL 4-109 136
TYPE SUPERVISED DEVICE OUTPUT 4-110 137
TYPE CURRENT LOOP DEVICE 4-112 139
TYPE SUPERVISED CURRENT LOOP 4-113 140
LINK TO EQUIPMENT - 143
CL DEVICE SETUP 4-121 148
HARDWARE TEST 4-133 163
DEVICE PROTOCOL 4-138 168
INPUT DESCRIPTION A-5 -
OUTPUT DESCRIPTION B-1 to B-4 -
PANEL MENUS C-2 A-1
UPGRADE - B-1
MEMORY ALLOCATION - 33
UPGRADE: VER5.00 TO VER 6.10 VER 5.00 VER 6.10
64-ZONE LEXAN LAYOUT (255 ZONES MAX) - 16
START-UP SCREENS - 18
VERSION - 29
SITE VERSION - 30
GLOBAL ZONE REPEATERS & ID TEXT - 35
CMSI PORT SETUP - 39
PANEL START & END ZONE - 42
MAX DIALLING ATTEMPTS CHANGED FROM 99 TO 3 45 & 57 49 & 67
BAUSCH MODEM INIT STRING 46 50
LON DEVICES - 53
STEP-BY-STEP LON DEVICE INSTALL. WALKTHRU - 55
SYSTEM SETUP - 56
SYSTEM INFORMATION - 58
OPERATING MODES IO UNITS CORRECTED 82 & 110 93 & 122
MODE CHANGES 87 97
ZONE RANGE - 108
TIMERS - 150
MARKERS - 151
PANEL MENUS A-1 A-1
To Next Page
Loading...
