Aritech FP2000 Series Reference Guide

The field "Panel" confirms the fire panel number. The panel ID is also shown on line 8 of
the display: P:p. For global repeaters the word "Panel" becomes "G-Repeater" and line 8
displays G:r. For local repeaters the display is "repeater" and L:p/r is displayed on line 8.
The field Max. Config. : Panel/repeater show the maximum number of panels and
repeaters, local or global that can be configured. The
options are: 7/31
15/15
31/7
When transferring data from a computer to the fire panel, the fire panel ID of the data file
must match the fire panel ID.
When setup as a Global Repeater or Global Zone Repeater, additional Universal Node
settings are possible:
un-n for a Universal Node on the Setup/NET1/NET2 Port
un-m for a Universal Node on the Modem Port
• If set to 0/0, the Universal Node ID will automatically assume the ID of the connected
PC or Panel.
• If set to 0/x (x = valid repeater number) then the Universal Node functions will only
work if the connected PC or Panel will have the same ID.

Aritech FP2000 Series Specifications

General

Brand	Aritech
Model	FP2000 Series
Category	Fire Alarms
Language	English