Aritech FP2000 Series

range of products. The FP2xxx range of products language is set by the dip switch
situated on the host power supply (*See Appendix A of the FP2000 Installation and
Commissioning Manual for dip switch settings as well as modes of operation).
The switch is read at restart, and cannot be changed during operation.
Protocol:
The protocol used by the firepanel is set here. This applies only to the FP11xx/12xx
range of products. The FP2xxx range of products language is set by the dip switch
situated on the host power supply (*See Appendix A of the FP2000 Installation and
Commissioning Manual for dip settings as well as types of protocol).
The switch is read at restart, and cannot be changed during operation.