ARTEZEN SYNCRO - CLEANING the COLLECTION DRAWERS and the Lower Area Where DUST and RESIDUES ARE COLLECTED; Figure 38 - Collection of Flour and Dough Residues

Automatic Divider-rounder model Syncro
57/79
Use and maintenance manual (translation of the original instructions) - MASA6_en_2 of 23/03/2021
4.4.8 CLEANING THE COLLECTION DRAWERS AND THE LOWER AREA WHERE DUST AND
RESIDUES ARE COLLECTED
Before beginning, activate the safety measures indicated in par. 4.1.
Wear abrasion-resistant gloves, shoes with reinforced toe, dust-proof face mask.
With reference to the images inFigure 38 , at the end of each working day:
- extract the concave drawer ref. A, located under the output belt and clean it well
- extract, empty and clean the internal drawer ref. B.
- Open the front door and completely remove all flour and dough residues produced during the processing.
Both drawers can be washed with warm drinking water; before reassembling them, make sure they are perfectly
dry. Do not start the machine unless the drawers ref. 1 and ref. 2 have been fully inserted. The lower collection
area ref. C can be cleaned using a brush with soft bristles to move the residues towards the front edge, from
where they can be placed in a concave container which, if necessary, can be that of ref. A, which is suitable for
this type of use.
A
B
C
Figure 38 - Collection of flour and dough residues