A-6 Preliminary November 4, 1998 MAX 4000 Series Hardware Installation Guide
Provisioning the Switch
Provisioning the switch for ISDN BRI access
– 1 and 2 for each ISDN BRI line
– 01 and 02 for each ISDN BRI line
•
TT
is the 2-digit TID (required only for NI-1 [PVC=2]).
The TID can be a value from 00 to 62. It is assigned by your carrier. Ascend recommends
that you use 00 as the TID for all SPIDs.
For example, suppose you are using Northern Telecom in NTI Custom mode [PVC=1]). The
phone number of your ISDN BRI line, including the area code, is 415-555-1212. The
telephone company gives you the following SPID:
415555121201
Now suppose you are using Northern Telecom in NI-1 mode [PVC=2]). 510-555-6001 and
510-555-6002 are the phone numbers of your ISDN BRI line. You choose TID=00 for both
numbers and the telephone company gives you the following SPIDs:
5105550010100
5105550020200
To Next Page
Loading...
Need help?
General