Index
Q
MAX 4000 Series Hardware Installation Guide Index-3
privileges
assigning
, 4-6
passwords
, 4-6
restricting
, 4-6
Q
Quickstart
E1 line configuration
, 3-25
T1 line configuration
, 3-2
R
R2 signaling, 3-25, 3-26, 3-28, 3-33, 3-35
incoming calls, routing
, 3-36
RS-366 cabling specifications
, C-33
S
security levels, 4-6
Security profile
, 4-6
Full Access
, 3-15, 3-38
privileges, assigning
, 4-6
privileges, restricting
, 4-6
serial host
interface cabling abbreviations
, C-21
interface specifications
, C-21
Serial V.35 DTE port
, 1-7, C-41
Serial WAN cabling specifications
, C-41
Series56 digital modem card
, 1-5
signaling
inband
, 3-3, 3-11, A-1
inband, routing incoming calls
, 3-13
ISDN
, 3-3–3-5, 3-10–3-13, 3-25, 3-35
ISDN_NFAS
, 3-5, 3-11, 3-12
R2
, 3-25, 3-26, 3-28, 3-33, 3-35
R2, routing incoming calls
, 3-36
slot cards
Host/6 (AIM/6)
, 1-3
IDSL
, 1-6
inserting
, 2-3
interfaces
, 1-8
ISDN BRI network-interface card
, 1-4
ISDN terminal-interface card
, 1-4
Multiband inverse multiplexing
, 1-4
PIAFS-16
, 1-6
Series56 digital modem
, 1-5
V. 1 1 0
, 1-5
specifications
battery
, B-1
cable length requirements
, C-40
E1/PRI WAN ports
, C-20
environmental requirements
, B-2
Ethernet interface
, C-4
IDSL specifications
, C-43
ISDN BRI interface
, C-20
RS-366 cabling
, C-33
serial host interface
, C-21
serial WAN cabling
, C-41
T1/PRI interface
, C-4
user interface
, C-1
V.35 cabling
, C-23
X.21 cabling
, C-39
SPIDs
, A-5
Northern Telecom
, A-5
T
T1 access
provisioning
, A-1
T1 line configuration
Quickstart
, 3-2
T1/PRI
access, provisioning switch for
, A-2
cable specifications
, C-6
CSU requirements
, C-4
interface specifications
, C-4
provisioning
, A-2
WAN connector specifications
, C-12
terminal block connectors
, 2-7
U
user interface
input entry and editing
, 4-5
special characters
, 4-7
specifications
, C-1
V
V.110 card, 1-5
V.35 cabling specifications
, C-23
VT100 interface
DO menu
, 4-7
edit fields
, 4-4
enumerated parameters
, 4-4
Ethernet menu
, 4-3
Main Edit Menu
, 4-1
menu numbers
, 4-9
menu window, to make active
, 4-2
Mod Config menu
, 4-3, 4-7
saving your changes
, 4-5
status window
, 4-2