To Next Page

To Previous Page

TD 92372GB

2007-06-18/ Ver. E

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway

Add Licence

A licence is needed to make the IP-DECT system operate. The licence is added in the

master.

1 Select General > Licence.

2 Click “Browse” and select the licence delivered by your supplier.

3 Click “Upload”

4 Reset in order to make the changes take effect, see 7.12 Reset on page 60.

Download Licence

The licence file can be downloaded from the IPBS/IPBL and saved on a disc or a server.

1 Select General > Licence.

2 Click the "download" link to the right of the licence or click "download all" if all

licences shall be downloaded.

3 Click “Save” and select where to save the licence file.

Delete Licence

Note: A licence file is needed for the IPBS/IPBL to operate properly. Be sure to have a

backup of the licence before deleting it.

1 Select General > Licence.

2 Click the "delete" link to the right of the licence or click "delete all" if all licences

shall be deleted.

7.1.4 Configure Automatic Firmware Update

The IPBS/IPBL can be configured to automatically update its firmware. A script file must be

uploaded to a suitable directory on an internal web server. For information on the script

file syntax, see

Appendix A: How to Use the Update Server on page 64.

1 Select General > Update

2 Enter the URL of the script file in the URL text field.

3 Enter the poll interval, in minutes, in the Interval (min) text field

4 Click "OK".

ASCOM IP-DECT Base Station User Manual

Other manuals for ASCOM IP-DECT Base Station