ASCOM IP-DECT Base Station User Manual

TD 92372GB
2007-06-18/ Ver. E
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway
3
Software
The software in the IPBS can be updated by downloading new software without
disconnecting the equipment. The new software is stored in flash memory. See
7.10
Update on page 56 for information.
Connectors
• Two 8-pin RJ45 modular jacks for LAN/PoE and powering
• A 6-pin RJ12 modular jack for factory testing
LEDs
Status of LED1 (lower LED) Description
Steady Green Operational
Quick flashing amber Download of firmware in progress.
Steady Amber TFTP mode
Alternating red/green No Ethernet connection
Status of LED2 (upper LED) Description
Not lit IPBS operational and no traffic
Air synchronization OK
Steady green IPBS operational and traffic
Air synchronization OK
Slow flashing green Air synchronization OK and fully occupied with
traffic
Flashing amber Air synchronization inadequate and no traffic
Slow flashing amber Air synchronization inadequate and fully
occupied with traffic
Steady amber Air synchronization inadequate and traffic
Flashing red No air synchronization - searching for air sync
candidates
Quick flashing red Download of RFP software in progress

ASCOM IP-DECT Base Station Specifications

General

Brand	ASCOM
Model	IP-DECT Base Station
Category	Cordless Telephone
Language	English